Metal Roof Replacement in Shreveport: Built for Red Clay, Pines, and Supercell Hail
Shreveport sits on the Red River in the Ark-La-Tex, where tall loblolly pines, live oaks, and sweetgums drop limbs and needles onto roofs, and where spring supercells bring large hail and tornadoes. If your shingle roof is hail-battered, algae-streaked, or past its service life, a full Metal Roof Replacement in Shreveport gives you a roof that sheds debris and stands up to the weather. We tear off the old roofing, inspect and repair the decking for moisture damage, and install a complete new metal system. From Highland Victorians to Cross Lake subdivision homes, we build roofs for this climate. Metal Roof Installation is the new-build side of what we do; replacement is the tear-off and re-roof side.
Why Metal Roof Replacement Matters on Shreveport Roofs
Shreveport's long, hot, humid summers feed algae and mildew on asphalt shingles, and spring hail cracks and bruises them. On the 1920s-50s brick Colonials and ranches in Broadmoor and Southern Hills, and the 1960s-80s split-levels across Bossier City, shingles are usually at the end of their life. Metal changes the math: it resists hail impact, sheds pine needles, and reflects heat. Some carriers may offer discounts for impact-rated roofs, so ask yours.
- We remove every layer of old roofing down to the deck, so we can see soft spots and rot.
- We replace damaged decking and re-nail loose sheathing before any panel goes down.
- We install new underlayment, edge metal, and flashing as part of the complete system.
- We haul away all old roofing and debris, leaving the yard clean.
A full tear-off is the only way to know what the decking looks like after decades of pine needles and Louisiana humidity.
Key info: A 1950s ranch in Broadmoor with two layers of hail-battered shingles is a typical tear-off. We strip both layers, find soft decking near the chimney, replace it, and install a new standing seam roof with new flashing. That is the job done right.
For official permit requirements, check with the City of Shreveport's building department before any re-roof: City of Shreveport.
How We Replace a Metal Roof in Shreveport, Step by Step
Every replacement follows the same sequence, whether it is a Victorian in Highland or a brick ranch in Haughton. We protect landscaping, strip the old roof, fix the deck, and install the new metal system with new flashing at every penetration. We schedule around Shreveport's spring storm season and summer heat, starting early and keeping the site secure each day.
- We inspect the roof and attic, measure the roof, and check the decking from above and below.
- We set up tarps and protection for siding, gutters, and landscaping, especially under the big oaks.
- We tear off the old roofing and haul it away in dumpsters staged in the driveway.
- We repair or replace rotten decking and re-nail loose sheathing.
- We install underlayment, edge metal, valley metal, and new flashing at chimneys and skylights.
- We install the metal panels or shingles, fasten them per manufacturer spec, and seal penetrations.
- We clean the site, walk the roof with you, and hand over the warranty paperwork.
That sequence is what separates a replacement from a patch job, and it is why we do not skip the deck inspection.
Key info: On a 1990s subdivision home near Cross Lake with architectural shingles, we found hail bruising across the south slope. We stripped the roof, replaced two sheets of decking, and installed stone-coated steel. The homeowner asked their carrier about an impact-rated discount.
If you are in the 71101 zip, see our Shreveport 71101 metal roof replacement page for local details.
Metal Roof Replacement Approaches We Use in Shreveport
The right system depends on your roof pitch, your budget, and how your home is built. A steep Victorian in Highland may call for standing seam, while a low-slope ranch in Bossier City may work better with exposed-fastener panels. We match the approach to the house, not the other way around.
| Approach | Description | Best for |
|---|---|---|
| Full tear-off and standing seam | Strip old roofing, repair deck, install concealed-fastener standing seam panels. | Homeowners who want maximum weather protection and clean lines. |
| Full tear-off and exposed-fastener panels | Strip old roofing, repair deck, install corrugated or ribbed panels with screws. | Budget-conscious replacements on ranches and outbuildings. |
| Full tear-off and metal shingles | Strip old roofing, repair deck, install metal shingles that mimic traditional looks. | Historic homes and HOA neighborhoods with design rules. |
| Full tear-off and stone-coated steel | Strip old roofing, repair deck, install stone-coated steel panels. | Homeowners who want hail resistance and a shingle-like look. |
Whichever approach you choose, the tear-off and deck repair are the same, and that is where the long-term performance comes from.
Metal Roof Replacement Cost in Shreveport: What to Expect
Metal roof replacement in Shreveport starts from $9 per square foot, but the final number depends on the roof. Pitch, access, the number of layers to tear off, decking condition, and the metal system you choose all move the price. A simple gable ranch in Haughton costs less than a cut-up Victorian roof in Highland with turrets and valleys.
Tree cover matters too. A roof under tall pines may need more deck repair from needle buildup and moisture, and staging dumpsters around big oaks adds labor. Getting two or three estimates is smart: it lets you compare scope, not just price, and confirm the contractor is pricing the same tear-off and flashing work. See our metal roof pricing page for the full breakdown.
Key info: A 2,000 sq ft ranch in Blanchard with one layer of shingles and good decking is a straightforward replacement. A 3,000 sq ft home in South Highlands with steep pitches, dormers, and two layers costs more because of labor and disposal, not because of the metal.
Hiring a Metal Roofing Contractor Near Me in Shreveport: What to Check
Before you sign, verify that the contractor is licensed and insured for roofing in Louisiana, and ask for a certificate of insurance. Get at least two or three written estimates that spell out tear-off, deck repair, underlayment, flashing, and disposal. Ask for local references, especially on homes like yours, and check whether your neighborhood or historic district has design review rules.
Permits are commonly required for a full replacement, and thresholds vary by jurisdiction, so confirm who pulls the permit. If your home is in a historic district or HOA, panel profile and color may be restricted. A contractor who knows Shreveport will ask those questions before the first panel is ordered. Contact us to schedule a free estimate.
Metal Roof Replacement in Shreveport: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Full tear-off and metal roof replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and new metal system; pitch and access move the price. |
| Standing seam replacement | Starting at $12/sq ft | Concealed fasteners and clean lines; roof complexity and panel width affect the final number. |
| Stone-coated steel replacement | Starting at $11/sq ft | Hail-resistant, shingle-like look; tear-off layers and deck condition add to the cost. |
| Complex or large-scale job | On estimate | Steep pitches, multiple valleys, dormers, or historic details need an on-site look before pricing. |
| Travel | Included | In Shreveport and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (318) 666-5827, no obligation to book. |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (318) 666-5827.
