Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Blanchard, LA (71107) · Local Professionals

Shreveport Metal Roofing · Fast response in Blanchard and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Blanchard is the kind of place where the lots are big, the pines are tall, and the roofs take a beating from everything north Louisiana throws at them. Most homes here in 71107 are brick-and-siding builds from the 1990s on, with a mix of older ranches and new construction tucked into the wooded subdivisions off Blanchard Latex Road and Highway 1. The lakeside properties near the old oil fields and the thick stands of loblolly pine mean one thing for your roof: limbs, needles, and summer algae are a constant battle.

That's why homeowners in Blanchard call Shreveport Metal Roofing. We know the difference between a roof that just looks good and one that can handle hail, wind, and the humidity that hangs over Caddo Parish from May to September. Whether you're near the Blanchard ball fields or out by the river bottoms, we've worked on roofs just like yours.

Metal Roofing in Blanchard (71107)

Blanchard isn't flat, and it isn't open. Most properties sit on red clay and sandy loam that holds water after a storm, and many lots are graded to drain toward a ditch or a wooded back edge. That means we pay close attention to where downspouts discharge and how flashing is sealed at the ground line. The tall pines and water oaks that make this area beautiful also drop limbs and needles year-round, so we often recommend standing seam or stone-coated steel because they shed debris better than shingles and resist the algae streaking that shows up on north-facing slopes. Access can be tight on some of the older driveways off Blanchard Road, so we plan material staging carefully, especially for larger panel runs.

Our team has installed and repaired metal roofs across Blanchard and the surrounding Shreveport area for years. We've seen how spring supercells and tropical remnants test fasteners and seams, and we build every roof with that in mind. From the lakeside homes to the newer subdivisions, we know what works here.

Our services in Blanchard

How a Job Works in Blanchard

Step 1: You call (318) 666-5827 or request a free estimate online. We schedule a time to walk your property, inspect the roof and attic, and talk through what you're seeing. We'll check for hail damage, loose fasteners, and any flashing issues, and we'll give you a written scope with options.

Step 2: Once you approve, we handle the permit paperwork with the local building department (requirements vary, so we confirm everything before we start) and coordinate with your HOA if you have one. On installation day, we protect your landscaping, stage materials where they won't block your driveway, and keep the site organized. If we're doing a retrofit over shingles, we verify the existing layers meet code before we proceed.

Step 3: When the work is done, we do a full cleanup, including a magnet sweep for nails, and walk the roof with you to show you the finished job. We don't leave until you're satisfied and we've answered every question.

Pricing for metal roofing in Blanchard depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, standing seam runs about $10 per square foot, and stone-coated steel is around $9 per square foot. A basic metal roof repair starts at $450, and screw replacement or re-fastening is from $750. For a free estimate tailored to your home, call (318) 666-5827. We'll give you honest numbers and explain what drives the cost.

My house is surrounded by tall pines near the Blanchard ball fields. Will a metal roof handle the needle drop and limb damage better than shingles?
Yes, metal roofing handles debris much better. Pine needles slide off standing seam and stone-coated steel more easily than they do off asphalt shingles, and metal resists punctures from small limbs. We often recommend a standing seam profile with a smooth finish for wooded lots, and we can add gutter guards to keep needles out of your gutters.
A storm just knocked a limb through my roof off Highway 1. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Blanchard and the surrounding area. Call us at (318) 666-5827 and we'll schedule an inspection as soon as possible, often the same day or next. We can tarp the damage to prevent further water intrusion and then give you a repair estimate.
What's the typical cost to replace a shingle roof with metal on a 2,000 square foot home in Blanchard?
For a 2,000 square foot home, a basic corrugated panel roof might run around $11,000 to $14,000, while standing seam could be $20,000 or more, depending on roof complexity and tear-off. We provide free estimates and can break down the cost by material so you can compare.
Do I need a permit to install a metal roof in Blanchard, and does the historic district affect anything?
Roofing permits are commonly required for a full replacement or re-roof in Blanchard, and requirements vary by jurisdiction. We always confirm with the local building department before starting. If your home is in a historic district or HOA, there may be design review for panel profile and color, and we can help you navigate that.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
Property line overhangs are governed by local setback rules and sometimes HOA covenants. We recommend checking your plat and talking with your neighbor before installation. We can adjust the design to keep everything within your property line and help you get any necessary HOA approval.
Are you fully insured for roofing work at my Blanchard property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Blanchard's climate, especially with the humidity and algae?
In Blanchard's humid summers, we recommend an annual inspection to check for loose fasteners, debris buildup, and algae growth. A simple wash with a mild detergent can keep algae in check, and we offer metal roof coating and painting if you want to refresh the finish. Keeping trees trimmed back from the roof also helps.
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm