Metal roofing prices in Shreveport typically range from about $5.50 to $20 per square foot installed, depending on the material and complexity of your project. Several factors influence the final cost, including roof size, pitch, material choice, and the condition of your existing roof. We believe in transparent pricing so you can plan with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Shreveport and Bossier: panel systems built for hot humid summers, large hail and tornado-season wind, installed over high-temperature synthetic underlayment with proper ventilation and careful flashing details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Shreveport homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as summer heat expands the roof. Strong wind resistance, a cool reflective finish and a surface that sheds pine needles and leaves. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hail-battered shingle, algae-streaked or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired for moisture damage, then a complete new metal system installed. Some carriers may offer discounts for impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles: no tear-off, less waste and a lower-cost path. Popular on Bossier and Shreveport brick ranches. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or wind-bent panels, resealing seams and penetrations, and fixing failed flashing before a summer cloudburst or tropical downpour becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and porch or dormer transitions) and fixed right, not just caulked over. Emergency tarping available after heavy storms. |
| Screw Replacement & Re-Fastening | From $750 | Shreveport's heat and humidity expand and contract metal roofs every day, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across the Ark-La-Tex. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Shreveport homeowners who want metal performance without the standing seam look. Lightweight, walkable and rated for hail and storm wind. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent hail and wind performance, fire-rated options and profiles that mimic the shake, slate and tile looks found on Shreveport homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century. Custom fabrication for the fine details on historic Shreveport homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: pressure cleaning of algae and mildew, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and brick walls: the number one leak point on Shreveport's older homes. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Wind-uplift fastening and hail protection for metal roofs: Shreveport rarely sees snow, but tornado-season gusts lift eaves and ridges and large hail dents thin panels. Reinforced clips, extra edge fasteners and heavier-gauge panels keep the roof on. Honest guidance on what yours needs. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and tornado-season damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, hail dents, coating and algae wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden thunderstorm downpours away from brick walls and foundations on red-clay lots, with guards that handle pine needles. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across the Shreveport-Bossier area, from Minden and Mansfield farm buildings to Bossier City and Caddo Parish shops, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, while complex shapes with multiple valleys, hips, and penetrations increase installation time and cost.
- Material selection : From economical corrugated panels to premium copper, the material you choose significantly affects the overall price per square foot.
- Accessibility and roof pitch : Steep roofs or limited access around your home may require additional safety measures and specialized equipment, adding to the labor cost.
- Existing roof condition : If your current roof needs repairs or removal before installation, this adds to the total cost. Retrofit over shingles can save money by avoiding tear-off.
What's included
- Travel included across the Shreveport area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate age, size, and any known issues ready when you call. A Shreveport Metal Roofing estimate includes a thorough inspection, material recommendations, and a detailed breakdown of labor and materials, with no hidden fees. Call (318) 666-5827 to schedule your free estimate and discuss your project with our team.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type (e.g., corrugated steel vs. copper), roof complexity, pitch, accessibility, and whether removal of the old roof is required. Labor costs and local market conditions also play a role.
Do you offer free estimates?
Yes, we provide free estimates for all our services. Call (318) 666-5827 to schedule a convenient appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. We also offer financing options to help make your project more affordable. Contact us for details.