Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Greenwood, LA (71033) · Local Professionals

Shreveport Metal Roofing · Fast response in Greenwood and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Greenwood is a small town west of Shreveport where ranches and acreages sit on red clay and sandy loam, and the roofs take a beating from sun, hail, and the occasional falling pine limb. If you live off Highway 80 or near the Greenwood Road corridor, you know the drill: shingle roofs age fast here, and more folks are switching to metal for the long haul.

That is where Shreveport Metal Roofing comes in. We are based in Shreveport, just a short drive from Greenwood, and we have worked on everything from small ranch houses to large acreage properties in 71033. When a storm rolls through or your roof starts leaking, we are the local crew you can call at (318) 666-5827.

Metal Roofing in Greenwood (71033)

Greenwood properties tend to be larger lots with a mix of single-story ranches, farmhouses, and a few newer builds. The ground here is mostly red clay and sandy loam, which can shift with heavy rain and cause drainage issues around foundations and under roof valleys. Many homes have mature pines and oaks close to the roofline, so falling limbs and needle buildup are common. That debris traps moisture and speeds up rust on older exposed-fastener panels. We also see a lot of outbuildings, shops, and barns that need metal roofing or repair, and those often use corrugated or ribbed panels because they are cost-effective and tough.

Our team has been serving Greenwood and the surrounding Shreveport area for years. We understand the local climate: long humid summers that feed algae and mildew, spring supercells with large hail, and the occasional ice storm that can dam up at the eaves. We know which panel profiles and finishes hold up best here, and we can help you choose a metal roof that fits your budget and your property.

Our services in Greenwood

How a Job Works in Greenwood

Step 1: You call us at (318) 666-5827 or request a free estimate online. We schedule a time to come out to your Greenwood property, inspect your current roof, and talk through your options. Whether you need a full replacement, a repair, or just a checkup, we give you a straight answer and a written estimate.

Step 2: Once you approve the estimate, we order materials and schedule the work. For larger acreage properties, we plan for equipment access and staging areas. If your home is in a subdivision with an HOA, we can help you get the necessary approvals on panel style and color. We also pull the required permits from the local building department; permit rules vary by jurisdiction, so we verify everything before we start.

Step 3: After the install or repair, we clean up thoroughly. We haul away old materials, use magnets to pick up screws and nails, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and your questions are answered.

Pricing for metal roofing in Greenwood depends on the size of your roof, its condition, access, and the material you choose. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a full replacement is around $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For a more precise number, call us at (318) 666-5827 for a free estimate.

My house is off Greenwood Road near the old school, and I have large pines dropping limbs on my roof. What is the best metal roof for that?
For homes surrounded by pines and oaks, we often recommend standing seam or a heavier gauge exposed-fastener panel. Standing seam has hidden fasteners, so there are no screws to back out or washers to fail, and it sheds debris better. We also suggest trimming back overhanging branches and keeping gutters clean to prevent buildup. We can inspect your roof and recommend the best option for your specific tree cover.
A storm just knocked a tree limb through my roof in Greenwood. Can you come out today for an emergency repair?
Yes, we handle storm and wind damage repairs in Greenwood and the surrounding area. Call us at (318) 666-5827 and we will get a crew out as soon as possible to tarp the area and prevent further damage. We also provide free inspections for storm damage and can help document the damage for your insurance claim.
What does a metal roof cost for a typical three-bedroom ranch in Greenwood?
For a standard three-bedroom ranch, most metal roof installations fall between $8 and $10 per square foot, depending on the panel type and complexity. A full replacement averages around $9 per square foot. Repairs are usually a few hundred dollars. The best way to get an accurate price is to call us for a free on-site estimate at (318) 666-5827.
Do I need a permit to replace my roof in Greenwood, and who handles that?
In most cases, a permit is required for a full roof replacement or re-roof. The rules and fees vary by jurisdiction, so we verify with the local building department before starting any work. We can pull the permit for you and make sure the job meets all local codes. Just give us a call and we will walk you through the process.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
It is always best to check your property line and any easements before installing a new roof. We can help you determine where your roof runoff will go and suggest gutter or flashing solutions that direct water away from the property line. If you are in an HOA, we can also help you get approval for the panel style and color.
Are you fully insured for roofing work in Greenwood?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have peace of mind knowing your property and our crew are protected.
What maintenance does a metal roof need in Greenwood's climate?
In Greenwood, metal roofs should be inspected annually, especially after storm season. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of rust or coating wear. We recommend cleaning gutters at least twice a year and trimming trees back from the roof. A professional inspection every few years can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm