Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Minden, LA (71055) · Local Professionals

Shreveport Metal Roofing · Fast response in Minden and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Minden, Louisiana, is a town where the past and present sit side by side. Historic brick homes near the downtown district and along the older streets have stood for generations, while farm-edge lots on the outskirts stretch toward open fields and piney woods. The mix of deep porches, steep rooflines, and wide lots means roofing here is never one-size-fits-all.

Homeowners in Minden (71055) call Shreveport Metal Roofing because we understand the local conditions: long humid summers that feed algae, spring storms that bring hail and wind, and the occasional ice storm that coats trees and roofs. We are based in Shreveport and serve Minden and the surrounding areas, bringing metal roofing expertise right to your doorstep.

Metal Roofing in Minden (71055)

Minden sits in Webster Parish, just east of Shreveport, where the terrain shifts from the red clay of Caddo Parish to sandy loam and rolling hills. The housing stock reflects that history: 1890s to 1920s Queen Anne and Victorian homes near the downtown historic district, 1920s to 1950s brick Colonials and ranches on tree-lined streets, and newer brick-and-siding subdivision homes with architectural shingles on the edges of town. Many properties have mature loblolly pines, live oaks, and magnolias that drop limbs and needles, putting roofs at risk. The humid climate encourages algae and mildew, and spring supercell thunderstorms bring large hail and tornadoes. Rare ice storms can cause ice damming at the eaves, especially on homes with complex rooflines. Our team has worked on all types of roofs in Minden, from historic homes that need copper or specialty metal to farm-edge properties that benefit from corrugated panel roofing. We know how to handle the tight lot access in older neighborhoods and the permitting requirements of the city.

Our experience serving Minden and the Shreveport area means we have seen it all: wind-lifted panels, failed fasteners, separated seams, and flashing gaps. We are fully insured with general liability and workers' compensation, so you can have peace of mind while we work on your property.

Our services in Minden

How a Job Works in Minden

Step 1: It starts with a free on-site assessment. Call us at (318) 666-5827, and we will schedule a time to inspect your roof, discuss your options, and provide a written estimate. We will answer your questions and explain the process clearly.

Step 2: Once you approve the estimate, we will order materials and schedule the work. In Minden, we coordinate with the local building department for permits, which are typically required for a full replacement or re-roof. If your home is in a historic district or HOA, we will help with design review to ensure the panel profile and color meet the guidelines. Our team is experienced with tight lot access in older neighborhoods, so we can navigate narrow driveways and place dumpsters efficiently.

Step 3: After the work is complete, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the property with you to ensure everything meets your satisfaction. We leave your property clean and your roof ready to protect your home for decades.

Pricing for metal roofing in Minden varies based on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that code limits the number of existing layers. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a free estimate tailored to your Minden property, call us at (318) 666-5827. We will provide a clear, no-obligation quote.

My historic brick home near downtown Minden has a steep roof with original detailing. Can you install a metal roof that preserves the look?
Yes. We specialize in copper and specialty metal roofing that can complement historic homes. We will work with you to choose a profile and color that respects the character of your home, and we can help with any historic district design review requirements.
A storm just knocked limbs onto my roof in Minden. How quickly can you respond for emergency repairs?
We offer free inspections for storm and wind damage. Call us at (318) 666-5827, and we will schedule a prompt assessment. We prioritize emergencies and can often provide temporary repairs to prevent further damage.
What is the typical cost to replace a shingle roof with metal on a 2,000-square-foot home in Minden?
For a 2,000-square-foot home, metal roof replacement typically starts around $18,000, but the exact cost depends on roof complexity, material choice, and whether tear-off is needed. We provide free estimates to give you an accurate figure.
Do I need a permit to install a metal roof in Minden, and how long does it take?
Yes, roofing permits are commonly required for full replacement or re-roof in Minden. The process typically takes a few days to a week, depending on the city's workload. We handle the paperwork and coordinate inspections for you.
My HOA requires approval for roof color. Can you help with that process?
Absolutely. We can provide material samples and documentation to submit to your HOA. We will work with you to select a color that meets the guidelines and schedule the work after approval.
Are you fully insured for roofing work in Minden?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Minden's humid climate?
We recommend an inspection every two to three years, especially after major storms. The humidity and tree debris can cause issues like loose fasteners or algae growth. Regular inspections help catch problems early and extend the life of your roof.
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm