Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Bossier City, LA (71110) · Local Professionals

Shreveport Metal Roofing · Fast response in Bossier City and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bossier City is a town of brick ranches and split-levels from the 1960s through the 1980s, with newer subdivisions spreading out toward Benton and Haughton. The lots are mostly flat, the pines are tall, and the spring hail that rolls across the Red River hits roofs hard.

We are Shreveport Metal Roofing, and we work Bossier City neighborhoods like Airline Drive, Stockwell Place, and the streets around Barksdale Air Force Base every week. When your shingles are tired of hail and heat, we install metal roofs that hold up to Ark-La-Tex weather.

Metal Roofing in Bossier City (71110)

Bossier City sits on the east side of the Red River, and the ground here is mostly flat with red clay and sandy loam under the topsoil. That flat terrain means water can pool around foundations after a heavy rain, so we pay close attention to roof pitch, gutter sizing, and drainage away from the house. The tall loblolly pines and water oaks that shade so many Bossier City yards are beautiful, but they drop limbs and needles that clog valleys and scratch shingles. We often recommend metal shingle or standing seam roofs for homeowners in 71110 because they shed debris better than asphalt and resist the algae streaking that our humid summers encourage.

Our team has been installing, repairing, and replacing metal roofs across Bossier City and the surrounding Shreveport area for years. We know the housing stock: the 1950s brick ranches near the Bossier City Civic Center, the 1970s split-levels off Airline Drive, and the newer subdivision homes out toward Swan Lake Road. Each one has different flashing details and decking conditions, and we handle them all.

Our services in Bossier City

How a Job Works in Bossier City

Step 1: You call us at (318) 666-5827 or request a free estimate online. We schedule an on-site assessment, usually within a day or two, and walk your roof with you. We check for hail dents, lifted panels, rusted fasteners, and flashing gaps, then give you a written scope and price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department. Most Bossier City subdivisions have HOA design rules, so we help you choose a panel profile and color that will pass review. On the work day, our crew protects your landscaping, removes the old roofing, and installs the new metal system. Tight lots near the river or in older neighborhoods can mean careful staging, and we plan for that.

Step 3: We clean up every nail and scrap, haul away the old material, and do a final walkthrough with you. We show you the finished roof, explain the warranty, and make sure you are satisfied before we leave. Your property is left clean and ready for the next storm season.

Metal roofing in Bossier City is priced by the square foot, and the ballpark numbers depend on the material and the complexity of your roof. A basic corrugated or ribbed panel roof starts around $5.50 per square foot, while standing seam runs from $10 per square foot. Metal shingle and stone-coated steel are both around $9 per square foot, and a full replacement averages $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, but keep in mind that local code limits how many layers you can leave in place. Repairs like leak fixes or flashing work start at $450, and screw replacement or re-fastening starts at $750. The final price depends on roof size, access, the condition of the decking, and how urgent the job is. Call us at (318) 666-5827 for a free estimate that fits your specific Bossier City home.

My Bossier City ranch has a low-slope roof and lots of pine needles. Is metal roofing a good fit?
Yes. Many ranches in Bossier City have low slopes, and standing seam metal performs well there because the panels lock together and shed debris. Pine needles can still collect in valleys, so we recommend a smooth panel profile and regular gutter cleaning. We can also add a leaf guard system to keep needles out of your gutters.
A storm just knocked limbs onto my roof in Bossier City. How fast can you respond?
We offer free storm and wind damage inspections and prioritize active leaks. Call us at (318) 666-5827 and we will schedule an assessment as soon as possible, usually within 24 to 48 hours. If the roof is actively leaking, we can often tarp it the same day to prevent further damage.
What does a typical metal roof replacement cost for a 2,000 square foot home in Bossier City?
For a 2,000 square foot ranch with a simple gable roof, a metal shingle or stone-coated steel replacement typically runs between $18,000 and $22,000, depending on tear-off, decking repairs, and trim. Standing seam would be higher, around $20,000 to $25,000. These are ballpark figures; call (318) 666-5827 for a free estimate tailored to your roof.
Do I need a permit to replace my roof in Bossier City?
Yes, a roofing permit is generally required for a full replacement or re-roof in Bossier City. The rules and fees are set by the local building department, and requirements can vary. We handle the permit application for you, and you can verify current requirements on the City of Bossier City website at https://www.bossiercity.org/.
My HOA requires approval for a metal roof. Can you help with that?
We can. Many Bossier City subdivisions have design review committees that restrict panel profiles and colors. We provide product samples, color chips, and specification sheets to submit with your HOA application. We also respect property line setbacks and will coordinate with neighbors if a crane or staging is needed near the line.
Are you insured for work on my Bossier City property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Bossier City's climate?
Metal roofs are low maintenance, but our humid summers and spring storms mean you should inspect fasteners and seals annually. We recommend checking after hail events and clearing pine needles from valleys and gutters. A professional inspection every two to three years can catch loose screws or flashing issues early, before they become leaks.
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm