Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Springhill, LA (71075) · Local Professionals

Shreveport Metal Roofing · Fast response in Springhill and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Springhill, Louisiana, is a small timber-country town where ranch homes and older farmhouses sit on generous lots shaded by pines and oaks. If you live near Main Street or out toward the Springhill High School area, you know how fast a spring hailstorm can strip shingles and leave your roof vulnerable. Metal roofing is a smart fit here, and we specialize in installing, repairing, and replacing metal roofs that stand up to what Springhill weather throws at them.

Homeowners in ZIP 71075 call Shreveport Metal Roofing because we understand the local conditions: heavy rain, occasional ice, and the kind of wind that comes with a supercell. Whether you are near the Springhill City Park or on a rural route outside town, our team is ready to help.

Metal Roofing in Springhill (71075)

Springhill sits in the Ark-La-Tex region, where the ground is a mix of red clay and sandy loam, and many properties have mature pine trees that drop needles and limbs. That means roofs here face debris buildup, especially in valleys and behind chimneys. The housing stock includes older ranch homes and farmhouses, many with original shingle roofs that are due for replacement. Metal roofing is popular because it sheds debris, resists hail, and reflects heat. We often recommend metal roof over shingles (retrofit) for ranches and timber-country homes, since it saves on tear-off costs and adds a durable layer. For homes with complex rooflines or historic features, we carefully assess whether a retrofit is allowed by local code. Our team has worked throughout Shreveport and surrounding areas, including Springhill, and we know the local building department requirements. We also handle flashing, chimney, and skylight repairs, which are common leak points in older homes.

Our experience serving Springhill and the Shreveport area means we understand the specific challenges: tight lots in town, long driveways in rural areas, and the need to coordinate with local suppliers. We are fully insured with general liability and workers' compensation, so you are protected.

Our services in Springhill

How a Job Works in Springhill

Step 1: Call us at (318) 666-5827 or request a free estimate online. We will schedule an on-site assessment at your Springhill property. Our team inspects your roof, checks for leaks, damaged flashing, and loose fasteners, and discusses your options, including metal roof installation, repair, or replacement. We provide a written estimate with clear pricing.

Step 2: Once you approve, we schedule the work. For a full replacement, we handle permit applications with the local building department (requirements vary, so we verify). We coordinate delivery of materials and protect your landscaping. On tight lots near downtown Springhill, we plan for limited access and use equipment that fits. For retrofits over shingles, we confirm code limits on existing layers. Our crew works efficiently, and we keep you informed of progress.

Step 3: After installation, we clean the site thoroughly, removing all old materials and debris. We walk through the finished roof with you, answer questions, and provide care tips. We leave your property clean and your new metal roof ready to protect your home for decades.

Pricing for metal roofing in Springhill varies by job. Metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. A retrofit over shingles starts at $7 per square foot, which is often a good choice for ranches. Metal roof repair starts at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Coating and painting starts at $2.50 per square foot. Flashing, chimney, and skylight repair starts at $600, and snow guards start at $1,200. Gutters start at $9 per linear foot. Key cost factors include roof size, access, condition, and urgency. Call (318) 666-5827 for a free estimate tailored to your Springhill property.

My ranch home near Springhill High School has two layers of old shingles. Can you install a metal roof over them?
Possibly, but it depends on local code limits for existing layers. We inspect your roof and verify with the building department. If allowed, a retrofit can save on tear-off costs. If not, we will recommend a full replacement.
A storm just knocked limbs onto my roof in Springhill and I have an active leak. How fast can you respond?
We offer free inspections for storm and wind damage. Call us at (318) 666-5827, and we will schedule a prompt assessment. For active leaks, we can often provide temporary repairs to prevent further damage before a permanent fix.
What does a typical metal roof replacement cost for a 2,000 square foot home in Springhill?
For a 2,000 square foot home, replacement typically starts around $18,000, based on $9 per square foot. Factors like roof complexity, material choice, and tear-off affect the final price. We provide a detailed free estimate.
Do I need a permit for a metal roof replacement in Springhill, and how do I get one?
Permits are commonly required for roof replacements, but thresholds and fees vary. We handle the permit application with the local building department as part of our service, ensuring your project meets all codes.
My neighbor and I disagree about the property line, and my new metal roof may overhang slightly. What should I do?
Property line disputes are civil matters. We recommend resolving with your neighbor before work begins. If you are in an HOA, we can provide material specs for approval. We follow all setback requirements and can adjust plans if needed.
Are you fully insured for metal roofing work in Springhill?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide proof of insurance upon request, so you have peace of mind.
How often should I inspect my metal roof in Springhill, and what maintenance does it need?
We recommend an annual inspection, especially after storm season. Check for loose fasteners, debris buildup in valleys, and damaged flashing. Our team offers free estimates for inspections and can perform repairs to keep your roof in top shape.
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm